Brio 2000M 240 Volts

This BRIO 2000-M Pump controller can be put onto a pump and will switch the pump on and off upon detection of a drop and increase in pressure of clean water e.g when opening a tap. An Automatic Pump Pressure controller with Adjustable Pressure, now with a built-in timer which will allow automatically try to reset itself every 30 minutes in the event of a previous shut down due to a lack of water. 1" BSP Ports, dry run protection, pressure Gauge, Max 65°c, Max 80 lt/min, Max 12 amps, 240 Volts, 1 Phase. IP65.

The Brio has a factory setting of 1.5 Bar. (This can be adjusted between 1 and 3.5 Bar.

Dimensions,
Length = 195mm to end of thread,
Depth = 110mm,
Width = 110mm,